UltraGrip

Intergrain

UltraGrip

A slip resistant additive that has been formulated for use in UltraDeck , NaturalStain and UltraFloor to provide a high performance, long lasting, textured finish. When added to UltraDeck and NaturalStain, UltraGrip will reduce the tendency for decking and timber walkways to become slippery when wet. When added to UltraFloor Satin, UltraGrip will provide a slip resistant surface for timber stairs and floors.

[+] Add to My Inspiration

Where To Use
Use on all decking and exterior timber walkways in UltraDeck and NaturalStain. Use on interior timber floors and stairs in UltraFloor Satin.

Preparation
Preparation is the key to long lasting, professional looking results. Click here for how to prepare an exterior timber surface before coating, and here for preparing a timber floor.

Apply With
Use brush for UltraDeck and NaturalStain and an applicator for UltraFloor.

No. of Coats Required
Refer to UltraDeck, NaturalStain or UltraFloor. UltraGrip must be added to each coat of the timber finish.

Recoat Time
Refer to UltraDeck, NaturalStain or UltraFloor.

Drying/curing Time
Refer to UltraDeck, NaturalStain or UltraFloor.

Coverage Rate m2/L
Refer to UltraDeck, NaturalStain or UltraFloor.

Sand Between Coats
No.

Clean Up With
Water.

Packaging Sizes
200g, for use in 4L of UltraDeck, NaturalStain or UltraFloor, and 500g for 10L of UltraDeck, NaturalStain or UltraFloor.

Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.

*Coverage rates are subject to variation between different timber species. To ensure adequate timber protection, this coverage should not be exceeded.