Outdoor fabric surfaces get plenty of use around the Aussie home. That means they are exposed to plenty of dust and grime. And then, once the hotter months are over, these pieces of outdoor furniture are often forgotten about. But we didn’t forget.
A proper clean can help freshen outdoor fabric cushions up and get them ready for use again. With Tricleanium, a soft-bristled brush and a few simple steps, you can give your cushions a thorough clean at home.
If it’s not just the cushions that are looking a little worse for wear, here’s how your outdoor timber furniture can be brought back to life in time for summer.
Step 1: Remove And Dust
Remove the fabric cushions from their chairs. Wipe away any surface dust and grime from the fabric before beginning the cleaning process.
Step 2: Dilute Tricleanium
Tricleanium is an ultra-concentrated industrial strength cleaner and needs to be diluted before use. For general cleaning, dilute a ¼ cup of Tricleanium in 9L of hot water. Stir thoroughly to ensure it is completely diluted.
Step 3: Test Tricleanium
Test the diluted Tricleanium on a small, inconspicuous area of the fabric. This will help determine what effect the cleaner may have on the surface before you apply it to the whole cushion.
Step 4: Scrub Fabric
Using a soft-bristled brush, scrub the fabric. Allow a short amount of time for the Tricleanium to penetrate the surface, but do not let it dry.
Expert Tip - Keeping the surface wet is important because the remaining cleaner needs to be rinsed away in the next step.
Step 5: Rinse And Dry
While the Tricleanium is still wet, use a hose to rinse away the residue. Once the fabric is free from Tricleanium, allow the cushions to dry completely before placing them back on the chairs.
A little cleaning can go a long way towards freshening up your outdoor area for the season ahead. Find everything you need to refresh your outdoor space at your local Inspirations Paint store.
Frequently Asked Questions About Cleaning Outdoor Fabric Cushions
Can you use Tricleanium to clean outdoor fabric cushions?
Yes, Tricleanium can be used to clean outdoor fabric cushions when it is properly diluted and tested first on a small, hidden section of fabric. Because outdoor cushions can vary by material, colour and coating, always spot test before applying Tricleanium across the full cushion.
How do you dilute Tricleanium for outdoor cushions?
For general cleaning, dilute ¼ cup of Tricleanium in 9L of hot water. Stir the mixture thoroughly before use so the cleaner is fully dissolved, then apply it to the cushion fabric with a soft-bristled brush.
Do you need to rinse outdoor cushions after using Tricleanium?
Yes. Tricleanium residue should be rinsed away while the surface is still wet. Use a hose to rinse the outdoor fabric cushions thoroughly, then allow them to dry completely before placing them back on outdoor furniture.
Should you let Tricleanium dry on outdoor fabric?
No. Do not let Tricleanium dry on outdoor fabric cushions. Keeping the surface wet helps ensure the remaining cleaner can be rinsed away properly and reduces the chance of residue being left on the fabric.
What is the best brush to use on outdoor fabric cushions?
A soft-bristled brush is best for cleaning outdoor fabric cushions. It helps lift dust, grime and built-up dirt from the surface without being too harsh on the fabric.
How often should you clean outdoor fabric cushions?
Outdoor fabric cushions should be cleaned whenever they look dusty, grimy or stained and especially before heavier use in the warmer months. A seasonal clean can help freshen up outdoor cushions and keep your outdoor area feeling ready to enjoy.
What should you do before cleaning outdoor cushions with Tricleanium?
Before cleaning, remove the cushions from the chairs, brush away loose dust and grime, dilute the Tricleanium correctly, and test it on a small, inconspicuous area. This simple preparation helps you clean more confidently and avoid applying cleaner to unsuitable fabric.