How To Coat Timber Benchtops
We love timber in a bathroom. It is a fantastic way to add warmth to what is traditionally one of the coldest rooms in the house. But if you want to maintain this warmth for years to come, you need to protect your timber. That’s where Cabot’s CFP Floor comes in. And yes, this is a floor product, but trust us… there’s nothing better to protect your hard-working timber surface.
What you need:
Step 1: Clean
Using mineral turpentine, remove any stains, dirt and grime from the timber.
Expert Tip – For previously coated surfaces, clean with Cabot’s Floor Clean and allow to dry before testing a small area with the Cabot’s CFP Floor to determine if the coting will lift.
Step 2: Sand
In the direction of the grain, sand the timber surface with 180-240 grit sandpaper. Once the surface is smooth, remove all the dust with a microfibre cloth.
Step 3: Coat
Stir the Cabot’s CFP Floor thoroughly before cutting in around the edges of the timber benchtop with a brush. Next, roll an even coverage across the timber surface. Allow 3 hours drying time before applying the next coat.
Expert Tip – Bare timber surfaces require 3 coats of Cabot’s CFP Floor. Previously coated surfaces need 2 coats. If you are staining the timber, apply a single coat of Cabot’s CFP Floor before the stain. Then, once the staining is complete, finish the timber with 2 coats of Cabot’s CFP Floor.
Protect your timber and keep it looking great for years to come. Whether you're reviving an existing finish or restoring bare timber, a quality coating will enhance the appearance of the surface while providing long-lasting protection against everyday use.