Can I still paint inside when it’s cold and rainy outside? What are the best hints and tips?
You’re about to tackle that inside paint project but its cold and rainy outside. Can you still start your project? The short answer is absolutely yes, and we can think of no better way to spend a rainy day! But before you get your paint on, make sure you have a read through the below information and hints & tips to complete your indoor paint project when it’s cold and rainy.
Typically, the minimum temperature required to paint is 10 degrees Celsius – but make sure you check your paint tin before you start painting as sometimes this temperature can vary based on the brand and type of paint you are using. You can turn a heater on to let the room warm up a bit before you start your paint project, which will also help to decrease the drying time.
Keep in mind that the surface temperature of the substrate you are painting is going to be colder than room temperature; and different surfaces are going to be different temperatures… tiles, gyprock, wood, brick etc. So while you have the heater warming up the room, remember that the room temperature will need to be higher so that the surface temperature is still above that minimum temperature of 10 degrees Celsius (or the temperature listed on your paint can).
Patience is key when completing your indoor projects in cold and rainy temperatures. The paint is going to dry much slower, so expect extended drying times. This may also mean a longer recoat process. You can accelerate the drying time by opening doors and windows to increase the air flow and ventilation in the room you are painting. If it’s too cold or wet to open windows, or you are painting in an open planned room, you can also use fans and blow heaters to get the air circulating.
While the low temperatures and extended drying times that these cold and rainy days give us make it harder to paint, it doesn’t make it impossible! Don’t start your project too early in the morning or work too late into the afternoon to ensure you are painting in the optimum conditions for this weather. Remember there is less daylight during the day in the colder months, so expect that your project will take longer to complete – not just because of the slower drying process, but also because you will need to restrict the amount of painting you will get done in a day.
The rainy weather and duller days outside might cause some mould on the area that you are wanting to paint. Don’t stress – discovering some mould might increase your project time, but it’s easy to get rid of! Removal and treatment of the mould, and the ideal products to use, will vary slightly depending on the surface type and the room the mould is in. Click here for more information about removing mould from a painted surface or here for removing mould from interior brick, and as always our in-store experts are always on hand to point you in the right direction.
For some further tips on colour selection, surface preparation and paint application for your next project, check out our article about painting in winter. And as always, make sure have a chat to the experts at your local Inspirations Paint store before you start your next project!
Dear Sir/Madam, I would like to purchase 4L White paint for painting the exteriors. 1. The surface is metal (gate) and there are some rusts on it. I need to clean up the rusts and then paint it. a. What paint do you recommend? b. Can I apply the paint directly on the metal gate after the purchase or do I need to mix with other solutions? c. What is your quote? 2. The surface is exterior wall. Again, I need to clean up the moulds and then paint it. a. What paint do you recommend? b. Can I apply the paint directly on the exterior wall after the purchase or do I need to mix with other solutions? c. What is your quote? Please advise, Regards Malai,
Our white trims look more yellow than anything after just a few years. What do I need to do to stop them from yellowing again when I repaint?